1 PAIR

Please note you WILL need to cut your studs

20mm Hubcentric Wheel Spacers

5x114.3 with 67.1 centre bore

10.9 STEEL GRADE STUDS

Designed to fit

Mazda vehicles with M12x1.5 studs

Gives you 20mm spacing per side

Please note you may need to cut your factory studs as the normal stud length is approx. 24mm

Most of the time you may well find that stud length may well sit inside the rear of a lot of wheel designs

As many wheels have a hollow or concave rear to the hub area

Please check this when fitting the spacer

PCD / BOLT PATTERN 5x114.3

CENTRE BORE SIZE 66.1mm

These wheel spacers are a great fit giving that Euro look to your car or for getting the offset correct on a pair of wheels

They are designed to fit directly onto your original wheel hub using the nuts supplied in the kit

The wheel is then attached to the spacer using your original nuts

The spacer has a centre bore to match the hub to ensure a perfect fit

This is a complete set (1 pair) of wheel spacers, If you need to do all 4 wheels you will need to buy 2 PAIRS

If you are unsure of fitment please call us before ordering